Re: Camping vehicle mods...
Sorry for the late response (hope you are still with us!).
I dont't know of a step by step instruction but here is an approximation;
Get a seat riser kit (got mine from amazon or invest in some used hockey pucks and drill some holes in them)
https://www.amazon.com/Jeep-Wrangler.../dp/B007TWOOGI
Loosen the existing seat bolts (Its easier than repositioning a seat that tips over).
remove the two font bolts and lift the front of the seat then insert a spacer/hocky puck on both sides.
Insert a longer bolt into the seat leg and tighten finger tight (if you do not get the "kit you will have to make trips to the hardware store/home center to get bolts (there is one that is longer and larger than the other 3 (sorry I don't have the thread counts and bolt sizes).
remove the 2 rear bolts on the front seat and insert spacers then bolts and tighten... NOTE the seat may move around some so you may have to push/pull tug to get the bolts into the theads in the floor.
The longer larger bolt goes in the inner rear leg of a TJ seat.
tighten all bolts securely...
Hope it helps!
Enjoy!
Originally posted by iCampSavvy
View Post
I dont't know of a step by step instruction but here is an approximation;
Get a seat riser kit (got mine from amazon or invest in some used hockey pucks and drill some holes in them)
https://www.amazon.com/Jeep-Wrangler.../dp/B007TWOOGI
Loosen the existing seat bolts (Its easier than repositioning a seat that tips over).
remove the two font bolts and lift the front of the seat then insert a spacer/hocky puck on both sides.
Insert a longer bolt into the seat leg and tighten finger tight (if you do not get the "kit you will have to make trips to the hardware store/home center to get bolts (there is one that is longer and larger than the other 3 (sorry I don't have the thread counts and bolt sizes).
remove the 2 rear bolts on the front seat and insert spacers then bolts and tighten... NOTE the seat may move around some so you may have to push/pull tug to get the bolts into the theads in the floor.
The longer larger bolt goes in the inner rear leg of a TJ seat.
tighten all bolts securely...
Hope it helps!
Enjoy!
Comment